Liftgate Strut Ball Stud Replacement for Chevrolet Astro - 2WD 2000

1. Open and support the liftgate.
2. Remove the strut. Refer to Liftgate Strut Replacement .



3. Remove the strut ball from the lid or body by turning counterclockwise.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the strut ball to lid or body by turning clockwise into the weldnut.

Tighten
Tighten the strut ball to 25 N·m (18 lb ft).

2. Install the strut. Refer to Liftgate Strut Replacement .
3. Install the support. Close liftgate.