Hub Cap Replacement RPO PA6

Using a flat-bladed tool, pry the center cap off.

1. Place the center cap into position over the wheel lug nuts.
2. Snap the center cap into place.

Hub Cap Replacement RPO PF3

1. Using a flat-bladed tool, insert the tool into the notch.
2. Gently pry the center cap off.

1. Place the center cap into position over the wheel lug nuts.
2. Snap the center cap into place.

Hub Cap Replacement RPO PC2, PF3 w/ plastic nut caps

1. Remove the plastic nut caps.
2. Remove the center cap.

1. Place the center cap into position at the wheel opening.
2. Loosely install the plastic nut caps.
3. Tighten the plastic caps until snug.