GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Astro - 2WD 🢒 Body and Accessories 🢒 Interior Trim 🢒 Headlining Trim Panel Replacement

Headlining Trim Panel Replacement for Chevrolet Astro - 2WD 2002

Removal Procedure
  1. Remove the sunshades. Refer to Sunshade Replacement .
  2. Remove the overhead console, if equipped. Refer to Roof Console Replacement .
  3. Refer to the following procedures in order to remove the necessary moldings:
    4. •  Rear Upper Garnish Molding Replacement
    •  Side Door Opening Frame Garnish Molding Replacement
    •  Center Pillar Garnish Molding Replacement - Left Side
    •  Center Pillar Garnish Molding Replacement - Right Side
    •  Third Pillar Trim Replacement - Left Side
    •  Third Pillar Trim Replacement - Right Side
    •  Fourth Pillar Trim Replacement - Left Side
    •  Fourth Pillar Trim Replacement - Right Side

    Object Number: 314674 Size: SH
  4. Release the front headliner from the roof panel by separating the retaining strips.
  5. Remove the front headliner from the vehicle.
  6. Remove the right seat belt retractor. Refer to Seat Belt Retractor Replacement - Right Front in Seat Belts.
  7. Remove the dome lamp from the rear headliner. Refer to Dome Lamp Replacement in Lighting Systems.
  8. Remove the sliding door track garnish molding. Refer to Rear Side Door Garnish Molding Replacement .
  9. Remove the coat hooks. Refer to Coat Hook Replacement .

    10. Object Number: 704643 Size: SH
  10. Remove the 2 push-in retainers (4) at the front edge of the rear headliner (2).
  11. Detach the rear headliner (2) from the retaining strips (3).
  12. Remove the rear headliner (2) from the roof panel (1).
  13. With the aid of an assistant, remove the rear headliner from the vehicle.

Installation Procedure

    Object Number: 704643 Size: SH
  1. In order to install the rear headliner to the roof panel perform the following:
    2. 1.1. With the aid of an assistant, position the rear headliner to the roof panel.
    1.2. Attach the rear headliner to the retaining strips.
    1.3. Install the 2 push-in retainers (4) at the front edge of the rear headliner.
  2. Install the coat hooks. Refer to Coat Hook Replacement .
  3. Install the sliding door track garnish molding. Refer to Rear Side Door Garnish Molding Replacement .
  4. Install the dome lamp to the rear headliner. Refer to Dome Lamp Replacement in Lighting Systems.
  5. Install the right seat belt retractor. Refer to Seat Belt Retractor Replacement - Right Front in Seat Belts.

    6. Object Number: 314674 Size: SH
  6. Position the front headliner to the roof panel.
  7. Fasten the front headliner to the roof panel, ensuring that the retaining strips are fully engaged.
  8. Install the front side door opening frame garnish molding. Refer to Side Door Opening Frame Garnish Molding Replacement .
  9. Refer to the following procedures in order to install the necessary moldings:
    10. •  Fourth Pillar Trim Replacement - Right Side
    •  Fourth Pillar Trim Replacement - Left Side
    •  Third Pillar Trim Replacement - Right Side
    •  Third Pillar Trim Replacement - Left Side
    •  Center Pillar Garnish Molding Replacement - Right Side
    •  Center Pillar Garnish Molding Replacement - Left Side
    •  Rear Upper Garnish Molding Replacement
    • Install the overhead console. Refer to Roof Console Replacement .
    • Install the sunshades. Refer to Sunshade Replacement .