Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Driver Information System Schematics Connector End View Reference: Instrument Panel, Gages, and Console Connector End Views | |||
1 | Did you review the Driver Information Center (DIC) Description and Operation? | Go to Step 2 | Go to Driver Information Center (DIC) Description and Operation |
2 | Test the instrument panel (I/P) lamp supply voltage circuit of the DIC for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 7 | Go to Step 3 |
3 | Test the RAP fuse supply voltage circuit of the DIC for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 7 | Go to Step 4 |
4 | Test the ground circuit of the DIC for an open or for a high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 7 | Go to Step 5 |
5 | Inspect for poor connections at the harness connector of the DIC. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
6 | Replace the DIC. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming. Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
