Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 |
Does the voltmeter show battery voltage? | -- | ||
2 | Connect the voltmeter from the terminal (BAT) at the generator to ground. Does the voltmeter show battery voltage? | -- | ||
3 | Locate and repair an open RED (2) wire from a fusible link at the splice S132 to the generator. Is the repair complete? | -- | System OK | -- |
4 |
Is the voltmeter reading within the specified range? | 13--16 V | Go to Battery Load Test | |
5 |
| -- | ||
6 |
Is the resistance greater than the specified value? | 10 ohms | ||
7 | Locate and repair an open in BRN (25) wire from the I/P cluster to the generator. Is the repair complete? | -- | System OK | -- |
8 |
Does the voltmeter show battery voltage? | -- | ||
9 | Locate and repair an open in PNK (39) wire from the I/P fuse block to the I/P cluster. Is the repair complete? | -- | System OK | -- |
10 | Remove and inspect the battery indicator lamp. Is the lamp open? | -- | ||
11 | Repair or replace the I/P cluster as necessary. Is the repair complete? | -- | System OK | -- |
12 | Using an ohmmeter, test across B16 and B17 pins of the I/P cluster for resistance. Is the resistance within the specified range? | 400-600 ohms | ||
13 | Replace the battery indicator lamp. Is the repair complete? | -- | System OK | -- |
14 |
Is the repair complete? | -- | System OK | -- |