GM Service Manual Online
For 1990-2009 cars only

The purpose of New Product Information is to highlight or indicate important product changes from the previous model year.

Changes may include one or more of the following items:

    • Torque values and/or fastener tightening strategies
    • Changed engine specifications
    • New sealants and/or adhesives
    • Disassembly and assembly procedure revisions
    • Engine mechanical diagnostic procedure revisions
    • New special tools required
    • A component comparison from the previous year

Torque Values and/or Fastener Tightening Strategies

    • A non-torque angle strategy has been added for cylinder head bolts.
        In an on-vehicle situation where a torque angle meter may not fit into the vehicle packaging, a three step tightening process may be used with a torque wrench.
    • Cylinder head and connecting rod bolts apply a torque angle strategy.
    • Certain fasteners should not be reused. Bolts, studs, or other fasteners that must be replaced will be called out in the specific service procedure.

Changed Engine Specifications

Engine specifications remain the same as the 1997 products.

New Sealants and/or Adhesives

    • Additional applications have been added to the table including:
       - Crankshaft keyway adhesive
       - Flywheel bolt threads sealant
       - Exhaust manifold bolt threadlock
       - Engine block oil gallery plug threads sealant
       - Engine block oil gallery plug threads sealant
    • Refer to sealers, adhesives, and lubricants.

Disassembly and Assembly Procedure Revisions

    • A new design Teflon® rear crankshaft oil seal
    • A new design valve stem oil seal for exhaust valves only.
    • Engine block plug information has been enhanced to include all oil gallery and coolant plugs.
    • Discard all used gaskets, seals, or O-ring seals unless otherwise indicated.
        Gaskets, seals, or O-ring seals that can be reused will be identified in the specific service procedure.

Engine Mechanical Diagnostic Procedure Revisions

    • Base Engine Misfire, Valve Train, and other diagnostic information is now provided in table form.
        Potential or probable causes are supplied for each specific concern.
    • Refer to Base Engine Misfire Diagnosis .

New Special Tools Required

    • Tool J 35621-A is a revision of J 35621
    • Refer to Special Tools .