The ball joints and the steering linkage need lubrication.

Lubricate at the recommended intervals. Refer to Fluid and Lubricant Recommendations in Maintenance and Lubrication.

The shock absorbers are loose.

Tighten the bolts. Refer to Fastener Tightening Specifications in Front Suspension.

The shock absorber bushings are worn.

Replace the shock absorber. Refer to Shock Absorber Replacement in Front Suspension.

The control arm bushings are worn.

Replace the bushings. Refer to Upper Control Arm Bushings Replacement or Front Lower Control Arm Bushing Replacement in Front Suspension.

The hub and wheel bearings are loose or worn.

Replace the hub and wheel bearing assembly. Refer to Front Wheel Hub, Bearing, and Seal Replacement in Front Suspension.

The stabilizer shaft is loose.

Tighten all of the stabilizer shaft attachments. Refer to Fastener Tightening Specifications in Front Suspension.

The wheel nuts are loose.

Tighten the wheel nuts. Refer to Wheel Installation in Tires and Wheels.

The suspension bolts are loose.

1. Tighten the bolts to specifications.
2. Replace the fasteners as needed.

Refer to Fastener Tightening Specifications in Front Suspension.