Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Hydraulic Brake Diagnostic System Check? | -- | Go to Step 2 | System OK |
2 | Inspect the GAUGES fuse 4 at the IP fuse block Is the fuse functional? | -- | Go to Step 4 | Go to Step 3 |
3 |
Is the repair complete? | -- | System OK | -- |
4 | Is the brake indicator only inoperative with the parking brake engaged? | -- | Go to Step 8 | Go to Step 5 |
5 | Is the brake indicator only inoperative when the hydraulic brake system has low brake pressure in the front or rear brakes? | -- | Go to Step 13 | Go to Step 6 |
6 | Is the brake indicator only inoperative with the ignition switch in crank? | -- | Go to Step 22 | Go to Step 7 |
7 | Is the brake indicator completely inoperative? | -- | Go to Step 28 | System OK |
8 |
Does the brake indicator light? | -- | Go to Step 9 | Go to Step 10 |
9 |
Is the repair complete? | -- | System OK | -- |
10 | Check for open in LT BLU (1134) wire between the daytime running lamp module and the park brake warning switch. Does an open exist? | -- | Go to Step 11 | Go to Step 12 |
11 | Repair open in LT BLU (1134) wire between daytime running lamp module and park brake warning switch. Is the repair complete? | -- | System OK | -- |
12 | Replace the Daytime Running Lamp (DRL) Module. Is the repair complete? | -- | System OK | -- |
13 |
Does the brake indicator light? | -- | Go to Step 14 | Go to Step 16 |
14 | Connect a fused jumper from the brake pressure warning switch connector PPL (680) wire cavity A to BLK (650) wire cavity B. Does the brake indicator light? | -- | System OK | Go to Step 15 |
15 | Locate and repair open in BLK (650) wire between brake pressure warning switch and G106. Is the repair complete? | -- | System OK | -- |
16 | Connect a fused jumper from the Electronic Brake Control Module (C1) PPL (680) wire cavity H to ground. Does the brake indicator light? | -- | Go to Step 19 | Go to Step 17 |
17 | Connect a test lamp from TAN/WHT (33) wire cavity F to ground. Does the brake indicator light? | -- | Go to Step 19 | Go to Step 20 |
18 | Locate and repair open in PPL (680) or TAN/WHT (33) wire between S129 and the Daytime Running Lamp (DRL) Module. Is the repair complete? | -- | System OK | -- |
19 | Replace the Electronic Brake Control Module (EBCM). Refer to Electronic Brake Control Module Replacement in Antilock Brake Systems. Is the repair complete? | -- | System OK | -- |
20 |
Does the brake indicator light? | -- | Go to Step 12 | Go to Step 21 |
21 | Locate and repair open in TAN/WHT (33) wire between the Daytime Running Lamp Module and the Instrument Cluster. Is the repair complete? | -- | System OK | -- |
22 |
Is there continuity? | -- | Go to Step 24 | Go to Step 23 |
23 | Locate and repair open in BLK (750) wire between C201 and G110. Is the repair complete? | -- | System OK | -- |
24 | Connect a fused jumper Between C201 LT BLU (1134) wire cavity B5 and ground. Does the brake warning indicator light? | -- | Go to Step 27 | Go to Step 25 |
25 |
Is there continuity? | -- | Go to Step 12 | |
26 | Locate and repair open in LT BLU (1134) wire between daytime running lamp module and C201 connector. Is the repair complete? | -- | System OK | -- |
27 | Replace the ignition switch. Refer to Ignition Lock Cylinder Replacement - On Vehicle in Steering. Is the repair complete? | -- | System OK | -- |
28 |
Does the test lamp light? | -- | Go to Step 29 | Go to Step 30 |
29 |
Does the brake indicator light? | -- | Go to Step 12 | Go to Step 31 |
30 | Locate and repair open in PNK (39) wire between I/P fuse block and instrument cluster. Is the repair complete? | -- | System OK | -- |
31 | Use a test lamp to backprobe Instrument Cluster TAN/WHT (33) wire cavity A13 to ground. Does the test lampJ 35616-200 light? | -- | Go to Step 32 | Go to Step 33 |
32 | Locate and repair open in TAN/WHT (33) between the Instrument Cluster and the Daytime Running Lamp (DRL) Module. Is the repair complete? | -- | System OK | -- |
33 | Replace the Instrument Cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Is the repair complete? | -- | System OK | -- |
