Disassembly Procedure
- Remove the upper and lower steering column trim covers. Refer
to Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Pop the wire harness assembly
(4) out of the wire harness strap (5).
Remove the 2 wire harness straps (3) from the wire harness assembly
(4).
Remove the wire harness strap (2) from the steering column housing assembly
(1).
- Remove the SIR coil assembly
by doing the following:
3.1. | Remove the retaining ring (1) using the snap ring pliers. |
3.2. | Remove the SIR coil assembly (3). |
3.3. | Remove the wave washer (2). |