Disassembly Procedure
- Remove the upper and lower steering column trim covers. Refer
to Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Remove the wire harness
assembly (4) from the wire harness strap (5).
- Remove the 2 wire harness straps (3) from the wire harness assembly
(4).
- Remove the wire harness strap (2) from the upper steering column
housing assembly (1).
- Slide the 2 connectors
of the turn signal and multifunction switch assembly (2) off of the bulk
head connector (1).
- Remove the key alarm connector
(1) from the lock module assembly (2).
- Remove the 2 tapping screws from the ignition key alarm switch
assembly (3).
- Remove the ignition and key alarm switch assembly (3).