Tools Required

J 23653-SIR Lock Plate Compressor

1. Install the inner race (4).
2. Install the upper bearing inner race seat (3).
3. Install the upper bearing spring (2).
4. Install the turn signal cancel cam assembly (1) and lubricate with synthetic grease.



5. Align the race and upper shaft assembly (1) to the 12 o'clock position.



6. Install the shaft lock shield assembly (1).



7. Install the bearing retainer using the J 23653-SIR .
8. Install the SIR coil assembly. Refer to Inflatable Restraint Steering Wheel Module Coil - Assemble - Off Vehicle .