GM Service Manual Online
For 1990-2009 cars only

The auxiliary heater is an optional floor-mounted heater that provides heating to the rear of the vehicle. This unit operates independently of the standard heater. The auxiliary heater is regulated through the auxiliary heater control on the instrument panel. The auxiliary system consists of the following:

    • A separate heater core
    • A blower fan

Heater hoses extend from the auxiliary unit to a vacuum-operated water valve where the heater hoses connect to the standard heater hoses. The three-position, vacuum-operated water valve cuts off coolant flow when the OFF position is selected. When the LOW or MEDIUM positions are selected, the valve eliminates radiant heat and reduces coolant flow.

Blower Switch

The three-speed blower switch for the auxiliary heater is located in the instrument panel, above the radio. In addition to controlling blower motor speed, the switch also triggers an electro-mechanical valve that controls coolant flow to the auxiliary heater core. The blower switch and the valve positions are as follows:

Blower Switch

Valve Position

OFF

Valve closed

LOW

Valve open

MEDIUM

Valve open

HIGH

Valve open