GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Astro - 4WD 🢒 Restraints 🢒 Seat Belts 🢒 Seat Belt Latch Replacement - Center Rear

Removal Procedure
  1. Remove the rear seat from the vehicle. Refer to Rear Bench Seat Replacement in Seats.

    2. Object Number: 162219 Size: SH
  2. Remove the seat belt latch retaining bolts from the seat frame.

    3. Object Number: 162216 Size: SH
  3. Remove the seat belt latch retaining bolts from the seat frame.
  4. Remove the seat belt latch through the seat back.
  5. Remove the seat belt latch from the vehicle.

Installation Procedure

    Object Number: 162216 Size: SH
  1. Install the seat belt latch to the vehicle through the seat back.

    2. Object Number: 162219 Size: SH
  2. Install the seat belt latch to the vehicle through the seat back.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts that hold the seat belt latch to the seat frame.

    4. Tighten
    Tighten the seat belt latch bolts to 53 N·m (39 lb ft).

  4. Install the rear seat to the vehicle. Refer to Rear Bench Seat Replacement in Seats.