Disassembly Procedure
- Remove the upper steering column housing components. Refer to
Steering Column Jacket - Disassemble - Off Vehicle
.
- Remove the ignition and key alarm switch assembly. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle
.
- Remove the park lock cable
assembly (1) from the lock module assembly.
| 3.1. | Place the steering column lock cylinder set into the off position. |
| 3.2. | Place the shift lever clevis into the park position. |
| 3.3. | Use a small blade to push against the locking tab on the end of
the park lock cable assembly (1). |
| 3.4. | Disconnect the park lock cable assembly (1) from the lock
module assembly. |
Important: The lock bolt assembly (4) is under slight spring tension from the lock
bolt spring (3). Hold the lock bolt (4) in place while removing the lock module
assembly (2).
- Remove the 3 pan head tapping screws (1) from the lock module assembly
(2).
- Remove the lock module assembly (2) and the lock bolt assembly
(4) from the steering column housing assembly (5).
- Remove the lock bolt spring (3) from the lock bolt assembly (4).
