Daytime Running Lamp (DRL) Diode Replacement for Chevrolet Astro - 4WD 1999

1. Remove the body side front lower trim panel.

Refer to Body Side Front Lower Trim Panel Vent Replacement in Interior Trim.

2. Remove the screw that retains the diode to the body lock pillar.
3. Disconnect the electrical connector from the diode.
4. Remove the diode from the vehicle.

1. Install the diode to the vehicle.
2. Connect the electrical connector to the diode.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the screw that retains the diode to the body lock pillar.

Tighten
Tighten the screw that retains the diode to the body lock pillar to 6 N·m (53 lb in).

4. Install the body side front lower trim panel. Refer to Body Side Front Lower Trim Panel Vent Replacement in Interior Trim.