Seat Belt Buckle and Latch Replacement - Rear RPO ZP5

1. Remove the rear bench seat from the vehicle. Refer to Rear Bench Seat Replacement in Seats.
2. Remove the seat belt latch by removing the hog rings and lifting up on the cover to expose the nut. The complete seat cover does not have to be removed.
3. Remove the seat belt latch nut.



4. Remove the seat belt latch.

1. Install the seat belt latch.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the seat belt latch nut.

Tighten
Tighten the seat belt latch nut to 53 N·m (39 lb ft).

3. Install the seat cover and rehog ring it back in place.
4. Install the rear bench seat to the vehicle. Refer to Rear Bench Seat Replacement in Seats.

Seat Belt Buckle and Latch Replacement - Rear RPO ZP7

1. Remove the seat belt buckle latch bolt from the side of the riser.
2. Remove the seat belt buckle latch. The seat does not have to be removed from the vehicle.

1. Install the seat belt buckle latch to the side of the riser.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the seat belt buckle latch bolt.

Tighten
Tighten the seat belt buckle latch bolt to the riser to 35 N·m (26 lb ft).

Seat Belt Buckle and Latch Replacement - Rear RPO ZP8

1. Remove the rear bench seat side cover screw to expose the seat belt latch bolt.



2. Remove the rear bench seat side cover screw.
3. Remove the seat belt latch nut.
4. Remove the seat belt latch.

1. Install the seat belt latch.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the seat belt latch nut.

Tighten
Tighten the seat belt latch nut to 53 N·m (39 lb ft).

3. Install the rear bench seat side cover and screw.