GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Astro - 4WD 🢒 Restraints 🢒 Seat Belts 🢒 Rear Seat Shoulder Belt Guide Adjuster Replacement

Removal Procedure

    Object Number: 162109 Size: SH
  1. Open the cover on the rear seat shoulder belt to expose the bolt.
  2. Remove the rear seat shoulder belt retaining bolt from the guide adjuster bracket.
  3. Remove the left rear - C-pillar side garnish molding trim by grasping both the sides and pull rearward.
  4. Remove the 2 guide adjuster bracket retaining bolts from the pillar.
  5. Remove the guide adjuster bracket from the pillar.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 162109 Size: SH
  1. Install the guide adjuster bracket to the pillar.
  2. Install the 2 guide adjuster bracket retaining bolts to the pillar.

    3. Tighten
    Tighten the guide adjuster bracket retaining bolts to the pillar to 20 N·m (15 lb ft).

  3. Align the tabs of the C-pillar side garnish molding trim with the openings in the pillar and push inward until fully seated.
  4. Install the shoulder belt retaining bolt to the guide adjuster bracket.

    5. Tighten
    Tighten the shoulder belt retaining bolt to the guide adjuster bracket to 53 N·m (39 lb ft).

  5. Close the cover on the rear seat shoulder belt bolt.