Additional ground straps are used to connect the body frame to the engine and the transmission. Always connect all ground straps to ensure a good ground path to the battery for all electrical components.

1. Remove the bolt.
2. Clean the bolt and the mounting surface.

1. Install the ground lead.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolt.

Tighten
Tighten the bolt to 40 N·m (29 lb ft).