Removal Procedure
- Remove the fuel sender assembly. Refer to
Fuel Sender Assembly Replacement
.
- Note the position of the
fuel strainer (2) on the fuel sender.
- Support the fuel sender assembly with one hand and grasp the strainer
(2) with the other hand.
- Pull the strainer off the fuel sender. Discard the strainer after
inspection.
- Inspect the strainer. Replace a contaminated strainer and clean
the fuel tank.
Installation Procedure
- Install a new fuel strainer
(2) in the same position as noted during disassembly. Push the strainer on
the bottom of the fuel sender until the strainer is fully seated.
- Install the fuel sender assembly. Refer to
Fuel Sender Assembly Replacement
.