Removal Procedure
- Remove the grille. Refer to
Grille Replacement
in Exterior Trim.
- Remove the outside air temperature sensor and wiring, if equipped.
- Remove the center support bracket bolts.
- Remove the support bracket
from the vehicle.
Installation Procedure
- Install the center support bracket to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the support bracket bolts.
Tighten
Tighten the bolts to 25 N·m (18 lb ft).
- Install the outside air temperature sensor and wiring, if equipped.
- Install the grille. Refer
to
Grille Replacement
in Exterior
Trim.