GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Release the park brake.
  2. Remove the cowl side panel trim. Refer to Cowl Side Trim Panel Replacement in Interior Trim.
  3. Remove the step trim plate. Refer to Front Side Door Step Mat Replacement in Interior Trim.
  4. Remove the park brake pedal. Refer to Parking Brake Lever Pedal Assembly Replacement .
  5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  6. Loosen the park brake cable at the adjuster.
  7. Remove the front park brake cable from the park brake cable adjuster.

  8. Object Number: 913310  Size: SH
  9. Remove the front cable from the pedal assembly.
  10. Lower the vehicle.

  11. Object Number: 376010  Size: SH
  12. Roll the carpet back to remove the cable and grommet from the body.
  13. Remove the cable from the vehicle.

Installation Procedure


    Object Number: 376010  Size: SH
  1. Install the cable.
  2. Route the cable through the floor pan and engage the grommet.

  3. Object Number: 913310  Size: SH
  4. Install the front cable to the pedal assembly.
  5. Install the pedal assembly. Refer to Parking Brake Lever Pedal Assembly Replacement .
  6. Roll the carpet into place.
  7. Install the step trim plate. Refer to Front Side Door Step Mat Replacement in Interior Trim.
  8. Install the cowl side panel trim. Refer to Cowl Side Trim Panel Replacement in Interior Trim.
  9. Raise the vehicle.
  10. Connect the front cable to the park brake cable adjuster.
  11. Adjust the park brake system. Refer to Park Brake Adjustment .
  12. Remove the safety stands and lower the vehicle.