Removal Procedure
- Remove the instrument panel extension. Refer to
Instrument Panel Extension Replacement
in Instrument Panel, Gages,
and Console.
- Remove the driver side knee bolster. Refer to
Driver Knee Bolster Replacement
in Instrument Panel, Gages, and Console.
- Remove the nuts that retain the knee bolster lap deflector to the instrument
panel carrier (IPC).
- Remove the bolts that retain the knee bolster lap deflector to the IPC.
- Remove the knee bolster lap deflector from
the vehicle.
Installation Procedure
- Install the knee bolster lap deflector to
the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the bolts that retain the knee bolster lap deflector to the IPC.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Install the bolts that retain the knee bolster lap deflector to the IPC.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Install the driver side knee bolster. Refer to
Driver Knee Bolster Replacement
in Instrument Panel, Gages, and Console.
- Install the instrument panel extension. Refer to
Instrument Panel Extension Replacement
in Instrument Panel, Gages,
and Console.