GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 38185 Hose Clamp Pliers

Removal Procedure

  1. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement in Engine Controls - 4.3L.

  2. Object Number: 280256  Size: SH
  3. Drain the engine coolant. Refer to Cooling System Draining and Filling in Engine Cooling.
  4. Remove the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement in Engine Cooling.
  5. Remove the heater hose support clamp bolt (5).
  6. Using the J 38185 , reposition the outlet heater hose clamp from the heater core.
  7. Remove the outlet heater hose (3) from the heater core.
  8. Using the J 38185 , reposition the outlet heater hose clamp from the water bypass valve.
  9. Remove the outlet heater hose (3) from the water bypass valve.

Installation Procedure


    Object Number: 280256  Size: SH
  1. Install the outlet heater hose (3) to the water bypass valve.
  2. Using the J 38185 , reposition the outlet heater hose clamp to the water bypass valve.
  3. Install the outlet heater hose (3) to the heater core.
  4. Using the J 38185 , reposition the outlet heater hose clamp to the heater core.
  5. Install the heater hose support clamp to the heater core.
  6. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  7. Install the heater hose support bolt (5).
  8. Tighten
    Tighten the bolt to 4 N·m (35 lb in).

  9. Install the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement in Engine Cooling.
  10. Fill the cooling system. Refer to Cooling System Draining and Filling in Engine Cooling.
  11. Install the air cleaner. Refer to Air Cleaner Assembly Replacement in Engine Controls - 4.3L.