GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Set the parking brake, turn the ignition key to the ON position and move the gear selector to 1st gear position.
  2. Lower the tilt steering column to the lowest position (if equipped).

  3. Object Number: 368470  Size: SH
  4. Remove the instrument panel cluster trim plate by grasping it around the edges until the retainers release from the instrument panel.
  5. Remove the accessory switches from the instrument panel cluster trim plate by releasing the tabs located on the sides of each switch.
  6. Remove the headlamp switch and the accessory switch electrical connectors.
  7. Remove the instrument panel cluster trim plate.

Installation Procedure


    Object Number: 368470  Size: SH
  1. Install the instrument panel cluster trim plate.
  2. Install the accessory switch and the headlamp switch to the instrument cluster trim plate by snapping into place.
  3. Install the headlamp switch and accessory switch electrical connectors.
  4. Install the instrument panel cluster trim plate by aligning the retainers to the opening in the instrument panel and push in place until fully seated.
  5. Move gear selector into PARK position, turn the ignition to the OFF position and release the park brake.