Removal Procedure
- Remove the instrument panel cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
.
- Remove the four screws the retain the instrument panel cluster
to the instrument panel.
- Gently pull the instrument
cluster straight out.
Installation Procedure
- Install the instrument
cluster to the instrument panel:
1.1. | Set the cluster in place in the instrument panel. |
1.2. | Align the cluster with the electrical connector on the instrument
panel. |
1.3. | Gently press the cluster in order to seat the cluster into the
instrument panel and onto the electrical connector. |
Notice: Refer to Fastener Notice in the Preface section.
- Install the four screws that retain the instrument cluster tot he instrument
panel.
Tighten
Tighten the four screws that retain the instrument cluster tot he instrument
panel 2 N·m (18 lb in).
- Install the instrument cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
.