Removal Procedure
- Loosen the nut on the
door jamb switch.
- Gently pull the switch away from the body.
- Disconnect the door jamb switch from the electrical connector(s).
- Tape the wiring to the body in order to prevent the wiring from
entering the hole in the door pillar.
- Remove the door jamb switch from the vehicle.
Installation Procedure
- Install the door jamb switch to the vehicle.
- Connect the electrical
connector(s) to the door jamb switch.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the nut on the door jamb switch.
Tighten
Tighten the door jamb switch nut to 3 N·m (27 lb in).