GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the wheel opening screws. If the vehicle is equipped with assist steps, the cladding will be shorter across the bottom.

  2. Object Number: 321677  Size: SH
  3. Remove the cladding from the rear quarter panel. Refer to Adhesive Retained Cladding Replacement .

Installation Procedure


    Object Number: 321677  Size: SH
  1. Install the cladding to the rear quarter panel. Refer to Adhesive Retained Cladding Replacement .
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the wheel opening screws.
  4. Tighten
    Tighten the wheel opening screws to 2 N·m (18 lb in).