Removal Procedure
- Remove the screws from
the cladding.
- Remove the retainers from the wheelhouse.
- Remove the nut on the back of the cladding from the stud.
- Remove the cladding from the retaining rail.
- Remove the retaining rail
screws.
- Remove the retaining rail from the body.
Installation Procedure
- Install the retaining
rail to the body.
Notice: Refer to Fastener Notice in the Preface section.
- Install the retaining rail screws.
Tighten
Tighten the retaining rail screws to 2 N·m (18 lb in).
- Install the cladding to
the vehicle.
- Install the nut on the back of the cladding to the stud.
Tighten
Tighten the nut to 7 N·m (62 lb in).
- Install the screws into the cladding.
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the retainers into the wheelhouse extension flange.