Tools Required

J 38778 Door Pad Trim and Garnish Clip Remover

1. Remove the seat belt upper mount. Refer to Front Seat Shoulder Belt Guide Adjuster Replacement in Seat Belts.
2. Remove the retaining screw.



3. Use the J 38778 in order to release the fasteners that retain the panel to the vehicle.

1. Install the panel to the vehicle:

1.1.	Align the retaining clips with the holes in the body.

1.2.	Press the panel in order to seat the fasteners into place.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the retaining screw.

Tighten
Tighten the retaining screw to 2 N·m (18 lb in).

3. Install the seat belt upper mount. Refer to Front Seat Shoulder Belt Guide Adjuster Replacement in Seat Belts.