GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 162202  Size: SH
  1. Remove the trim cover from the rear seat belt retractor, by grasping the sides and pull downward.
  2. Remove the seat belt retractor buckle from the latch.
  3. 2.1. Locate the red dot in the center of the buckle.
    2.2. Insert a small pointed tool in the center of the buckle.
    2.3. Push inward for it to release from the latch.

    Object Number: 162207  Size: SH
  4. Remove the rear seat belt retractor nuts from the roof reinforcement.
  5. Remove the rear seat belt retractor from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

  1. Install the rear seat belt retractor to the vehicle.

  2. Object Number: 162207  Size: SH
  3. Install the rear seat belt retractor nuts to the roof reinforcement panel.
  4. Tighten
    Tighten the seat belt retractor nuts to 35 N·m (26 lb ft).

  5. Snap the retractor cover into place.

  6. Object Number: 162202  Size: SH
  7. Install the seat belt buckle to the latch.