Rear Sliding Door Lock Striker Replacement for Chevrolet Astro - 4WD 2003

1. Remove the right hand body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side .
2. Remove the two bolts that retain the rear storage compartment, if equipped.
3. Remove the bolts (5).



4. Remove the striker (4).
5. Remove the spacer (3).
6. Remove the washer (2).
7. Remove the nut plate (1).

1. Install the nut plate (1).
2. Install the washer (2).
3. Install the spacer (3).



4. Install the striker (4).

Notice: Refer to Fastener Notice in the Preface section.

5. Install the striker bolts (5).

Tighten
Tighten the striker bolts to 24 N·m (18 lb ft).

6. Install the right hand body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side .