Removal Procedure
- Remove the retaining screw from the garnish molding.
- Remove the driver's side seat belt upper mounting bolt. Refer
to
Front Seat Shoulder Belt Guide Adjuster Replacement
in Seat Belts.
- Pull back on the garnish
molding in order to release the fasteners.
- Remove the garnish molding from the pillar.
Installation Procedure
- Install the garnish molding
to the pillar:
1.1. | Align the locator pin with the pillar. |
1.2. | Press the locator pin firmly into place, seating all fasteners. |
- Install the driver's seat belt upper mounting bolt. Refer to
Front Seat Shoulder Belt Guide Adjuster Replacement
in Seat Belts.
Notice: Refer to Fastener Notice in the Preface section.
- Install the garnish molding retaining screw.
Tighten
Tighten the garnish molding retaining screw to 2 N·m (18 lb in).