SMU - Revised Brake Pads Replacement-Rear
| Subject: | Revised Brake Pads Replacement-Rear |
| Models: | 2000-2004 Chevrolet Suburban-2WD, Tahoe-2WD |
| 2002-2004 Chevrolet Avalanche-2WD |
| 2000-2004 GMC Yukon-2WD, Yukon Denali-2WD, Yukon XL-2WD |
This bulletin is being issued to revise Step 2 of the Brake Pads Replacement-Rear procedure in the Disc Brakes sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
The following documents have been updated in SI:
| • | Document ID# 710680-Brake Pads Replacement-Rear (Except 15 Series Pickup) |
| • | Document ID# 745244-Brake Pads Replacement-Rear |
Step 2 of the Installation procedure has been revised to as follows:
Important: The orientation of the rear brake pads is critical for proper pad wear.
2. When working on a 2WD 1500 UTILITY, install the inboard rear pad to the brake caliper bracket with the LONGER pad end chamfer facing down. For all other utilities, install the brake pads to the brake caliper.
