Rear Object Alarm Module Switch Replacement. Chevrolet Avalanche

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Avalanche - 2WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Rear Object Alarm Module Switch Replacement

Rear Object Alarm Module Switch Replacement Escalade

Callout	Component Name
Preliminary Procedure Remove the instrument panel accessory trim panel. Refer to Instrument Panel Accessory Trim Plate Replacement.
1	Rear Object Alarm Module Switch Assembly Tip Disconnect the electrical connector. Use a small flat-bladed tool to release the locking tabs on the switch.

Callout

Component Name

Remove the instrument panel accessory trim panel. Refer to Instrument Panel Accessory Trim Plate Replacement.

Rear Object Alarm Module Switch Assembly

Tip

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
1	Instrument Panel Accessory Trim Plate Refer to Instrument Panel Accessory Trim Plate Replacement .
2	Instrument Panel Accessory Switch Screws (Qty: 2) Tighten 2 N·m (18 lb in)
3	Instrument Panel Accessory Switch Assembly Tip Disconnect the electrical connector.