The mechanical components of the Hybrid Two-Mode 2ML70 Transmission are as follows:
| • | Torque dampener assembly |
| • | Vane-type main fluid pump assembly |
| • | Gerotor type auxiliary fluid pump assembly |
| • | Input shaft and internal assembly |
| • | Sun gear carrier assembly first position |
| • | Drive motor with generator assembly first position |
| • | Drive motor with generator assembly second position |
| • | Internal gear assembly second position |
| • | Sun gear carrier assembly second position |
| • | 1-3 clutch housing assembly |
| • | Center support assembly |
| • | Output shaft assembly |
| • | Control valve body assembly |
The electrical components of the Hybrid Two-Mode 2ML70 are as follows:
| • | Two 60 KW electric concentric motors |
| • | Output speed sensor assembly |
| • | Manual shift shaft position switch |
| • | Control solenoid valve assembly, which contains the following components: |
| - | Transmission control module (TCM) |
| - | 5 variable bleed line pressure control (PC) solenoids |
| - | Transmission fluid pressure (TFP) switch assembly |
For more information, refer to
Electronic Component Description
.
