Auxiliary Blower Motor Replacement. Chevrolet Avalanche

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Avalanche - 2WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Auxiliary Blower Motor Replacement

Auxiliary Blower Motor Replacement Suburban/XL

Callout	Component Name
Preliminary Procedure Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side . Disconnect the blower motor electrical connector.
1	Screw, Blower Motor (Qty: 3) Notice: Refer to Fastener Notice in the Preface section. Tighten 1.5 N·m (13 lb in)
2	Motor Assembly, Blower

Callout

Component Name

Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side .
Disconnect the blower motor electrical connector.

Screw, Blower Motor (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

Motor Assembly, Blower

Callout	Component Name
Preliminary Procedure Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side. Disconnect the blower motor electrical connector.
1	Locking Tab (Qty: 2) Procedure Remove one attaching screw securing blower motor if applicable Carefully pull back locking tabs on blower motor assembly.
2	Auxiliary Blower Motor Assembly Procedure Rotate blower motor counterclockwise to remove.

Callout

Component Name

Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side.
Disconnect the blower motor electrical connector.

Locking Tab (Qty: 2)

Auxiliary Blower Motor Assembly

Rotate blower motor counterclockwise to remove.