Preliminary Procedures

1. Thoroughly clean the torque dampener housing assembly, including threads, with clean solvent.
2. Clean sealing surfaces.
3. Inspect all threaded holes. If necessary, repair any thread damage.

1

Input Shaft Bushing

2

Trans Fluid Cooler Pipe Fitting Seals (Qty: 2)

Notice: Refer to Seal Reuse Notice in the Preface section.

Tip
Refer to Transmission Fluid Cooler Pipe Fitting Seal Replacement .

3

Auxiliary Fluid Pump Sealing Surface

Tip
Clean any gasket material.