Window Height Set
- Slide the sunroof sunshade to the open position.
 
- Remove the sunroof panel side covers. Refer to 
Sunroof Panel Side Opening Closeout Cover Replacement.
 
- Cycle the sunroof to the fully closed position.
 
- Loosen the sunroof window panel screws.
 
- Individually adjust the 4 corners of the sunroof window panel.
 
- Adjust the front of the sunroof window panel to 0.0 -- 1.0 mm (0.040 in) below the top surface (3) of the roof panel.
 
- Adjust the rear of the sunroof window panel to 1.0+0.0 mm (0.040 in) above the top surface (2) of the roof panel.
 
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the sunroof window panel screws.
 
Tighten
Tighten the sunroof window panel screws to 4 N·m (35 lb in).
- Install the sunroof panel side covers. Refer to 
Sunroof Panel Side Opening Closeout Cover Replacement.
 
- Close the sunshade.