Removal Procedure
- Raise and suitably support
the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Disconnect the vent pipe (5) from the evaporative emission (EVAP)
canister vent valve.
- Disconnect the EVAP canister vent valve electrical connector (2).
- Remove the EVAP canister vent valve from the EVAP canister vent
valve bracket.
Installation Procedure
- Install the EVAP canister
vent valve to the EVAP canister vent valve bracket.
- Connect the EVAP canister vent valve electrical connector (2).
- Connect the vent pipe (5) to the EVAP canister vent valve.
- Lower the vehicle.