Removal Procedure
Important: Clean all evaporative emission (EVAP) tube connections and surrounding areas
before disconnection in order to avoid possible EVAP system contamination.
- Raise and suitably support the vehicle.
Refer to
Lifting and Jacking the Vehicle
in General Information.
- Disconnect the rear EVAP purge tube from the chassis EVAP purge pipe.
- Disconnect the rear EVAP purge tube from the EVAP canister.
- Cap the chassis EVAP purge pipe and the EVAP canister in order to prevent
possible EVAP system contamination.
Installation Procedure
- Remove the caps from the chassis EVAP purge
pipe and the EVAP canister.
- Connect the rear EVAP purge tube to the EVAP canister.
- Connect the rear EVAP purge tube to the chassis EVAP purge pipe.
- Lower the vehicle.