Removal Procedure
- Remove the intake air
resonator. Refer to
Intake Air Resonator Replacement
.
- Disconnect the mass air flow/intake air temperature (MAF/IAT)
sensor electrical connector (3).
- Loosen the air cleaner housing cover screws.
- Remove the air cleaner housing cover.
- Remove the air filter element.
- Inspect the air filter element for the following:
- Clean or replace the air filter element as required.
Installation Procedure
- Install the air filter element.
- Install the air cleaner housing cover.
- Tighten the air cleaner housing cover screws until snug.
- Connect the MAF/IAT sensor
electrical connector (3).
- Install the intake air resonator. Refer to
Intake Air Resonator Replacement
.