GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Avalanche - 4WD 🢒 Steering 🢒 Rear Wheel Steering 🢒 Rear Wheel Steering Control Module Bracket Replacement

Removal Procedure

    Object Number: 865336 Size: SH
  1. Remove the rear wheel steering control module (2) from the bracket. Refer to Rear Wheel Steering Control Module Replacement .
  2. Remove the nuts retaining the bracket to the frame.
  3. Remove the bracket from the vehicle.

Installation Procedure

    Object Number: 865336 Size: SH
  1. Install the bracket to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bracket retaining nuts.

    3. Tighten
    Tighten the retaining nuts to 25 N·m (18 lb ft).

  3. Install the rear wheel steering control module (2) o the bracket. Refer to Rear Wheel Steering Control Module Replacement .
  4. Perform a learn alignment. Refer to Wheel Alignment Measurement in Wheel Alignment.