GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Avalanche - 4WD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Rear Fog Lamp Replacement

Removal Procedure

    Object Number: 674475 Size: SH
  1. Remove rear fog lamp retaining bolt (2) from the fog lamp bracket.
  2. Disconnect the electrical connector from the rear fog lamp assembly.
  3. Remove the fog lamp assembly (1) from the vehicle.

Installation Procedure

    Object Number: 674475 Size: SH
  1. Install the fog lamp assembly (1) to the bracket.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the fog lamp retaining bolt (2).

    3. Tighten
    Tighten the bolt to 25 N·m (18 lb ft).

  3. Connect the electrical connector to the fog lamp assembly.
  4. Inspect the fog lamp aiming.