GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Avalanche - 4WD 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Cruise Control Indicator Inoperative

Step

Action

Yes

No

Schematic Reference: Cruise Control Schematics

Connector End View Reference: Cruise Control Connector End Views

1

Did you perform the Cruise Control Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Cruise Control

2
  1. Turn the ignition OFF.
  2. Install a scan tool.
  3. Turn the ignition ON, with the engine OFF.
  4. With the scan tool, Command the Cruise Control Lamp Test parameter ON, in the IPC Output Controls.

Does the Cruise indicator illuminate in the IPC?

Go to Step 4

Go to Step 3

3

Replace the instrument panel cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gages, and Console.

Did you complete the replacement?

Go to Step 5

--

4

Important: Program the replacement PCM.

Replace the PCM. Refer to the appropriate procedure:

    •  Powertrain Control Module Replacement in Engine Controls-4.8L, 5.3L, 6.0L
    •  Powertrain Control Module Replacement in Engine Controls-8.1L

Did you complete the replacement?

Go to Step 5

--

5

Operate the system in order to verify the repair.

Does the system operate properly?

System OK

Go to Step 2