GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Avalanche - 4WD 🢒 Body and Accessories 🢒 Body Rear End 🢒 Midgate Striker Replacement

Removal Procedure

    Object Number: 741396 Size: SH
  1. Fold down the rear seats.
  2. Remove the rear removable glass panel.
  3. Open the midgate to gain access to the striker.
  4. Remove the striker bolts.
  5. Remove the striker from the vehicle.

Installation Procedure

    Object Number: 741396 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

    Important: Ensure the mounting surface on the body is cleaned and free of any debris.

  1. Install the striker.

    2. Tighten
    Tighten the striker bolts to 9 N·m (80 lb in).

  2. Close the midgate.
  3. Inspect for correct operation of the midgate.
  4. Install the rear removable rear glass.
  5. Return the rear seat to the upright position.