Removal Procedure
- Slide up the seat back trim cover in order to gain access to the
rear cardboard panel fasteners. Refer to
Front Seat Back Cushion Cover and Cushion Pad Replacement
.
- Remove the panel fasteners.
Pull back the panel in order to gain access to the bushings.
- Remove the head restraint
retainers from the seat back frame by squeezing the retaining tabs together
at the base of the guide(s) and lifting up.
Installation Procedure
- Install the head restraint
retainers by pressing into the seat back frame until the retaining tabs snap
into place at the bottom of the frame opening.
- Position the cardboard
panel to the seat back frame and install the panel fasteners.
- Install the seat back trim cover. Refer to
Front Seat Back Cushion Cover and Cushion Pad Replacement
.