Removal Procedure
Tools Required
- Inspect the reverse input clutch housing and drum assembly for the following conditions:
• | Damaged or worn bushings |
• | Surface finish on the hub and outer housing - check band surface for flatness |
• | Rolled or distorted retaining ring groove |
- Using the
J 25019-16
with the
J 7004-A
, remove the reverse input clutch front bushing (603).
- Using the
J 25019-4
with the
J 8092
, remove the reverse input clutch rear bushing (606).
Installation Procedure
- Using the
J 25019-9
with the
J 8092
, install a reverse input clutch front bushing (603).
- Using the J 34196-3 which is part of kit
J 34196-B
with
the
J 8092
, install a reverse input clutch rear bushing (606).