- Remove the pump slide inner (207) and outer (206) springs.
- Place a rag over the springs while removing them to prevent the
springs from flying out.
- Remove the oil pump rotor (212) and pump vane rings (210).
- Remove the pump vanes (213).
- Remove the rotor guide (211).
- Remove the pump slide
(203), pump slide support seal (208) and the pump slide seal (209).
- Remove the slide seal back-up O-ring seal (202) and the oil seal
(slide to wear plate) ring (201).
- Remove the pivot slide pin (205) and the pivot pin spring (204).