Removal Procedure
- Remove the grille. Refer to
Grille Replacement
in Exterior Trim.
- Remove the air conditioning (A/C) condenser. Refer to
Condenser Replacement
in Heating, Ventilation and Air Conditioning.
- Remove the valve lifters. Refer to
Valve Lifter Replacement
.
- Remove the timing chain and sprocket. Refer to
Timing Chain and Sprocket Replacement
.
- Remove the camshaft retainer bolts.
- Remove the camshaft retainer.
- Install three 8 - 1.25 x 100 mm bolts into the camshaft front bolt holes.
- Using the bolts as a handle, carefully rotate and pull the camshaft out of the engine block.
- Remove the bolts from the front of the camshaft.
- Clean and inspect the camshaft. Refer to
Camshaft and Bearings Cleaning and Inspection
.
Installation Procedure
- Apply lubricant to the following components:
• | The camshaft bearing journals |
Notice: All camshaft journals are the same diameter, so care must be used in
removing or installing the camshaft to avoid damage to the camshaft bearings.
- Install three 8 - 1.25 x 100 mm bolts into the camshaft threaded bolt holes.
- Using the bolts as a handle, carefully install the camshaft.
- Remove the bolts from the front of the camshaft.
Notice: Refer to Fastener Notice in the Preface section.
- Install the camshaft retainer and bolts.
Tighten
Tighten the bolts to 12 N·m (106 lb in).
- Install the timing chain and sprocket. Refer to
Timing Chain and Sprocket Replacement
.
- Install the valve lifters. Refer to
Valve Lifter Replacement
.
- Install the A/C condenser. Refer to
Condenser Replacement
in Heating, Ventilation and Air Conditioning.
- Install the grille. Refer to
Grille Replacement
in Exterior Trim.