Important: Clean all evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting, in order to avoid possible EVAP system contamination.

1. Remove the rear fuel tank. Refer to Fuel Tank Replacement .
2. Disconnect the EVAP lines from the module. Refer to Plastic Collar Quick Connect Fitting Service .
3. Cap the EVAP openings in order to prevent possible EVAP system contamination.



4. Remove the EVAP lines (1) from the retaining clips.

1. Install the EVAP lines (1) to the retaining clips.



2. Remove the caps from the EVAP openings.
3. Connect the EVAP lines to the module. Refer to Plastic Collar Quick Connect Fitting Service .
4. Install the rear fuel tank. Refer to Fuel Tank Replacement .